Installing fog lamps to Hyundai eon

Installing fog lamps to Hyundai eon

So in this post I will show you how to install fog lamps or fog lights to your Hyundai eon. Fog lamps are purchasable in the market for around 1000 INR or could be ordered online for just 800 INR. So let’s get started

Following is the list of things that you will need for this modification.

1. A pair of screwdrivers

2. A sharp cutting tool such as a knife

3. A Pair of Eon fog lamps

4. 8 pcs screw

5. Wire

6. Switch

7. Patience

Step 1

Firstly you need to cut into your bumper where the fog lamps are to be fitted this could be done with the help of a sharp knife or a small saw

A pair of fog lamps

Cutting of the slot for fog lamps

Step 2

Once both your fog lamps slots are cut you will have to remove the bottom part of the bumper to get access to the cut slot(Image below). This is done so that u can screw the fog lamps into place (Image below)

Image 3 bumper screw removal

4 slot of screws

Step 3

Once you have screwed the fog light into place you have to do the same thing to the other fog lamp once done you will have to get you electric connection. For that you could follow the circuit diagram below. I would suggest first you try out the circuit before screwing in the fog lamps. Check the positives and the negative beforehand and for ease of understanding use a red wire for positive and a black wire for negative

Explanation of the circuit

Once u have fitted both the fog lights in place and have connected the fog lights positive wire to the other fog lights positive u need to connect one negative to ground (image below) and the other other end to the switch and one wire from the battery or the positive will go to the switch to complete the circuit.

Circuit of the lamps

Base and positive

Step 4

Now that you have two wires one from the battery positive and the other being the fog lamp wire you need to take the wire from your bonnet into the cabin and so u need to pass it thought the hole shown in the image(red circle) below now u need to connect it to a switch so that u can switch it on and off as and when required

Well there you go you have successful complete fixing the fog light on you Hyundai eon

Hope I was helpful

I will be back soon with a new do it your self-modification for your eon